|
RDE100.1 |
Room thermostat with programable week calendar, max. load 2A |
|
RDE100.1 |
Room thermostat with programable week calendar, max. load 2A |
|
R55 |
IP55 class thermostat |
|
R55 |
IP55 class thermostat |
|
ARW 1.5 |
Fan speed regulator 1.5 A |
|
ARW 1.5 |
Fan speed regulator 1.5 A |
ARW 3.0 |
Fan speed regulator 3.0 A |
|
ARW 3.0 |
Fan speed regulator 3.0 A |
ARW 5.0 |
Fan speed regulator 5.0 A |
|
ARW 5.0 |
Fan speed regulator 5.0 A |
ARW 7.0 |
Fan speed regulator 7.0 A |
|
ARW 7.0 |
Fan speed regulator 7.0 A |
ARW 10.0 |
Fan speed regulator 10.0 A |
|
ARW 10.0 |
Fan speed regulator 10.0 A |
ARW 15.0 |
Fan speed regulator 15.0 A |
|
ARW 15.0 |
Fan speed regulator 15.0 A |
|
03.431 |
Controller for destratificators that records the temperature difference between the floor and the ceiling with two temperature sensors and compares this with user given values, if the temperature difference between floor and the ceiling goes higher than the user value the relay switches the ceiling fans on, there is second user value which handles the switch off point, the current temperatures of the ceiling and the floor are constantly shown in an alternating display, protection class IP54, max. permissible current 4 A |
|
03.431 |
Controller for destratificators that records the temperature difference between the floor and the ceiling with two temperature sensors and compares this with user given values, if the temperature difference between floor and the ceiling goes higher than the user value the relay switches the ceiling fans on, there is second user value which handles the switch off point, the current temperatures of the ceiling and the floor are constantly shown in an alternating display, protection class IP54, max. permissible current 4 A |
|
EVS-1-15-DM |
Max. permissible load 1.5 A, stepless fan speed control using 0-10V or 0-20 mA signal, can be connected to BMS using Modbus RTU protocol |
|
EVS-1-15-DM |
Max. permissible load 1.5 A, stepless fan speed control using 0-10V or 0-20 mA signal, can be connected to BMS using Modbus RTU protocol |
EVS-1-30-DM |
Max. permissible load 3.0 A, stepless fan speed control using 0-10V or 0-20 mA signal, can be connected to BMS using Modbus RTU protocol |
|
EVS-1-30-DM |
Max. permissible load 3.0 A, stepless fan speed control using 0-10V or 0-20 mA signal, can be connected to BMS using Modbus RTU protocol |
EVS-1-60-DM |
Max. permissible load 6.0 A, stepless fan speed control using 0-10V or 0-20 mA signal, can be connected to BMS using Modbus RTU protocol |
|
EVS-1-60-DM |
Max. permissible load 6.0 A, stepless fan speed control using 0-10V or 0-20 mA signal, can be connected to BMS using Modbus RTU protocol |
EVS-1100-DM |
Max. permissible load 10.0 A, stepless fan speed control using 0-10V or 0-20 mA signal, can be connected to BMS using Modbus RTU protocol |
|
EVS-1100-DM |
Max. permissible load 10.0 A, stepless fan speed control using 0-10V or 0-20 mA signal, can be connected to BMS using Modbus RTU protocol |